2.
Parts and Functions
2.1.
Control Panel
POWER button
1
Use this button to turn the display on or put the display to standby.
MUTE button
2
Switch the audio mute ON/OFF.
INPUT button
3
•
Use this button to select the input source.
•
When the On Screen Display menu is active, this is also used as
the [SET] button.
[ ] button
4
Increase the adjustment while OSD menu is on, or increase the
audio output level while OSD menu is off.
[ ] button
5
Decrease the adjustment while OSD menu is on, or decrease the
audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while OSD
menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item while OSD
menu is on.
MENU button
8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
9
MUTE INPUT
1
2
3
4
5
6
MENU
7
8
NOTE:
"Keyboard Control Lock Mode" This function completely
disables the access to all Keyboard Control functions. To
enable or disable the keyboard control lock, press both [
and [
] buttons and hold down continuously for more than
3 (three) seconds.
Remote control sensor and power status indicator
9
•
Receives command signals from the remote control.
•
Indicates the operating status of the display:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters DPMS mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Off when the main power of the display is turned off
5
BDL3245E / BDL4245E / BDL4645E
]