Manual Shutter Speed/Iris Adjustment - Panasonic HC-X900M Owner's Manual

∫ To set the White Balance manually
1 Select , fill the screen with a white subject.
2 Touch and set the blinking
≥
HC-X900M
When using the viewfinder, press and hold the
CAMERA FUNCTION button.
≥ When the screen turns black instantly and the
stops flashing and then lights constantly, the setting is
complete.
≥ If the
display continues flashing, the White Balance cannot be set. In this case, use
other White Balance Modes.
≥ When the
display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
≥ When setting both the White Balance and the iris/gain, set the White Balance first.
≥
AWB is not displayed on the screen when

Manual shutter speed/iris adjustment

Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥
HC-X900M
Press the iA/MANUAL button or the CAMERA FUNCTION button to switch to Manual
Mode. (l 83)
For how to perform the settings when using the viewfinder, refer to page 84.
≥
HC-X800
Press the iA/MANUAL button to switch to Manual Mode. (l 83)
1
Touch [SHTR] or [IRIS].
2
Touch /
≥ Touch [SHTR]/[IRIS] to complete the adjustments.
Shutter speed:
SHTR
1/60 to 1/8000
≥ If [AUTO SLOW SHTR (2D)] is set to [ON], the shutter speed will be set between 1/30 and
1/8000.
≥ If [DIGITAL CINEMA] is set to [ON], the shutter speed will be set between 1/48 and 1/8000.
(When [AUTO SLOW SHTR (2D)] is set to [ON], the range is 1/24 to 1/8000.)
≥ The shutter speed closer to 1/8000 is faster.
≥ The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
Iris/Gain value:
IRIS
CLOSE !# (F16 to F1.7) !# OPEN !# (0dB to 18dB)
≥ Value closer to CLOSE darken the image.
≥ Value closer to 18dB brighten the image.
.
to adjust settings.
FOCUS FOCUS
WB WB
SHTR SHTR
IRIS IRIS
display
is being set.
AWB
MNL
85
VQT4C76