Dividing A Scene (Avchd) - Panasonic HC-X900M Owner's Manual

5
Touch [YES] and confirm (play back) the edited scene.
≥ When [NO] is touched, a confirmation message appears. Proceed to Step 7.
6
Stop the playback.
≥ A confirmation message appears.
7
Touch [ENTER].
≥ To continue deleting parts from other scenes, repeat Steps 2-7.
≥ Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
≥ It may not be possible to delete part of a scene with a short recording time.
≥ The scene will be divided into two scenes when the middle part of a scene is deleted.
≥
HC-X900M
The relay information is deleted when part of a scene that was relay recorded is deleted,
making it impossible to perform [RELAY SCENE COMBINE]. (l 107)

Dividing a scene (AVCHD)

It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
≥ Change the mode to
AVCHD scene. (l 39)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
MENU
2
Touch the scene to be divided.
3
Touch to set the dividing point.
≥ It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 91)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4
Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted. (l 102)
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if you are playing back a disc with a DVD burner (optional)
connected, or if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided
points cannot be deleted.
104
VQT4C76
and touch the play mode select icon. Then, select the
0h00m15s 0h00m15s 0h00m15s