Panasonic HC-X900M Owner's Manual page 154

Problem
VIERA Link does not
work.
The power of the DVD
burner cannot be turned
on.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
Problem
When connected by the
USB cable, this unit is
not detected by the PC.
When the USB cable is
disconnected, an error
message will appear on
the PC.
Cannot see the PDF
operating instructions
for HD Writer AE 4.1.
154
VQT4C76
With other products
(Setting on this unit)
≥ Connect with a HDMI mini cable (optional). (l 112)
, then touch [SETUP] # [VIERA Link] #
≥ Touch
MENU
[ON]. (l 112)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
≥ When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
≥ Other equipment might have not recognized the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 139, 146)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
≥ To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the
screen.
≥ You will need Adobe Acrobat Reader 5.0 or later or
Adobe Reader 7.0 or later to read the PDF operating
instructions for HD Writer AE 4.1.
Check points
Check points