Creating Still Picture From Motion Picture; Highlight & Time Frame Index - Panasonic HC-X900M Owner's Manual

Playback
operation
Direct playback

Creating still picture from motion picture

A single frame from the recorded motion picture can be saved as a still picture.
3D still pictures are created from the scenes recorded in 3D, and 2D still pictures are created
from the scenes recorded in 2D.
( (1920k1080) still pictures will be recorded for the AVCHD scenes and iFrame scenes,
2.1
M
and (640k360) still pictures will be recorded for the scenes saved in MP4.)
0.2
M
Press the button fully at the location to be saved as a still picture
during playback.
≥ It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
≥ Date the motion picture was recorded will be registered as date of the still picture.
≥ Quality will be different from the normal still picture.
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be
played back from any midway point of the scene you wish to see.
≥ Operate the zoom lever to
the thumbnail display to Highlight & Time Frame
Index. (l 40)
1
Touch .
≥ To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching it.
j Touch
(up)/
2
Touch the desired search condition.
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]
* It is not displayed on iFrame scenes and scenes saved in MP4.
92
VQT4C76
Playback display
During Playback
side and change over
(down) on the thumbnail scroll lever.
Operating steps
Touch the Direct playback bar or slide
it while touching.
≥ The playback pauses temporarily and
skips to the position touched or slid to
while touching.
≥ Playback will start by releasing your
touching or sliding finger.
≥
HC-X900M
Direct playback bar cannot be operated
with the remote control.
* *
/[HIGHLIGHT]