Table of Contents
Advertisement
Using for the first time
„ Remove the insulating sheet
Insulating sheet
„ Attach the nose pad
If required, use the included nose pad.
Nose pad A adjusts the attachment position
of the 3D Eyewear between 2 vertical levels.
(Slot 2 of the 3 protrusions on the 3D Eyewear
into the holes on nose pad A.)
When using nose pad B, ensure that all
3 protrusions on the 3D Eyewear are inserted
into the 3 holes on nose pad B.
Accessories
< > indicates the quantity.
„ 3D Eyewear case ·······················<1> „ Specialized band ························<1>
„ Nose pad A/B ·····························<1>
A
Select the nose pad that suit you from A
and B.
It is recommended to wear the 3D
glasses over correction glasses without
the nose pad
B
„ Attach the specialized band
If the 3D Eyewear slips out of place, use
the specialized band included to hold it in
place.
Specialized band
When the end of the specialized band is
straightened, form a loop at the end of
the band, and fix the twisted part.
Attach the band to the
left and right tips of the
frame, and adjust the
length.
Nose pad A
7
Advertisement
Table of Contents
