Using For The First Time; Accessories - Panasonic TY-EW3D10W Operating Instructions Manual

Using for the first time

„ Remove the insulating sheet
„
Insulating sheet
„ Attach the nose pad
„
If required, use the included nose pad.
Nose pad A adjusts the attachment position
of the 3D Eyewear between 2 vertical levels.
(Slot 2 of the 3 protrusions on the 3D Eyewear
into the holes on nose pad A.)
When using nose pad B, ensure that all
3 protrusions on the 3D Eyewear are inserted
into the 3 holes on nose pad B.
Make sure that the nose pad is inserted all
the way and securely attached.

Accessories

< > indicates the quantity.
„ 3D Eyewear case ·······················<1> „ Specialised band ························<1>
„ Nose pad A/B ·····························<1>
A
Select the nose pad that suit you from A
and B.
It is recommended to wear the 3D
glasses over correction glasses without
the nose pad.
Specialised band
B
„ Attach the specialised band
„
If the 3D Eyewear slips out of place, use
the specialised band included to hold it in
place.
When the end of the specialised band is
straightened, form a loop at the end of
the band, and fix the twisted part.
Attach the band to the
left and right tips of the
frame, and adjust the
length.
Nose pad A
ENGLISH - 7