Table of Contents
Advertisement
Using Precautions
„ Liquid Crystal Shutter (Lens)
Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the
3D Eyewear.
Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc.
Doing so may cause damage to the 3D Eyewear, and reduce the quality of the 3D
image.
„ Infra-red receiver section
Do not soil the infra-red receiver section or attach stickers etc. to it.
• Doing so may prevent the receiver from receiving signals from the television,
which may prevent the 3D Eyewear from operating normally.
If the 3D Eyewear is affected by other infra-red data communication equipment, the
3D images may not be displayed correctly.
„ Cautions during viewing
Do not use devices that emit strong electromagnetic waves (such as cellular
phones or personal transceivers) near the 3D Eyewear. Doing so may cause the
3D Eyewear to malfunction.
The 3D Eyewear cannot operate fully at high or low temperatures.
Please use within the specified usage temperature range (
If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used,
the light within the room may appear to be flickering. In this case, either darken or
switch off the fluorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the
3D Eyewear is worn upside down or back-to-front.
Liquid crystal displays (such as computer screens, digital clocks, or calculators etc.)
may be difficult to see while wearing the 3D Eyewear. Do not wear the 3D Eyewear
when watching anything other than 3D images.
page 11).
5
Advertisement
Table of Contents
