How To Start And Stop Cleaning - LG HOM-BOT LRV590S Owner's Manual

HOW TO START AND STOP CLEANING

Using the buttons on the HOM-BOT
After the HOM-BOT is turned on, press the START/STOP button to
begin cleaning. A melody will sound and cleaning will begin.
Press the START/STOP button during the cleaning cycle to stop cleaning.
When the 'START/STOP' button is pressed while the power supply
of the HOM-BOT is turned off, the power will be turned on. Press the
'START/STOP' button one more time to start cleaning.
Using the remote control
After the HOM-BOT is turned on, press the START button on the re-
mote control. A melody will sound and cleaning will begin.
Press the STOP button during the cleaning cycle to stop cleaning.
The HOM-BOT cannot be turned on from Stand By, by using the
remote control when the power of the HOM-BOT is off. When the
power is off, press the 'START/STOP' button on the upper side
of HOM-BOT to turn the power on and to allow the remote to be
used.
When the START button on the main unit or remote control is pressed, HOM-BOT will start cleaning in
'Spatial expansion' mode.
During cleaning, collisions can happen when the sensor cannot detect objects because of their shape.
When this happens, the internal impact detecting sensor will activate and engage a backward motion.
If the HOM-BOT is set to start cleaning at a location away from the home station, put the device on a flat
floor in order to prevent a malfunction of the obstacle detecting sensor. In addition, start cleaning from a
location where there are no obstacles such as curtains or walls within 30 cm (11.8 in) of the HOM-BOT.
Tip
For best results:
HOM-BOT.
turned to the home station as the current home position has been accurately read.
15
-