LG HOM-BOT LRV590S Owner's Manual page 33

BEFORE YOU CALL FOR SERVICE
Confirm before reporting the failure of HOM-BOT.
P o r b e l m
The HOM-BOT will not
activate.
Movements or travel path are
abnormal.
Suction power becomes weak.
Noise becomes louder.
The HOM-BOT cannot be
activated with the remote
control.
The brush does not rotate.
The HOM-BOT will not charge.
The power supply
automatically turns off.
The power supply cannot be
turned on.
29
S
Confirm that the power switch is turned on. (page 14)
Confirm that the battery has been charged. (page 17)
Carefully wipe the sensor with a smooth cloth. (page 24)
Turn on the power switch off and on.
Check whether there is foreign material blocking the suction port.
(page 23)
Empty the dust bin. (page 2 )
Clean the dust bin filter. (page 22)
Confirm that the dust bin has been fitted properly.
Confirm that the dust bin filter has been fitted properly. (page 22)
Check whether foreign material is caught in the brush. (page 23)
Replace the remote control batteries. (page 11)
Confirm that the control is within the coverage area of the main
frame, which is up to 3 m or 9.84 ft. (page 11)
Clean the brush. (page 23)
Confirm that the brush has been fitted properly. (page 23)
Remove objects around the home station. (page 13)
Confirm that the power supply is connected to the home station.
(page 13)
Wipe the charging terminal with a dry cloth.
This is not a failure. HOM-BOT has its own power saving function. If it is
not used for ten minutes after the power supply is turned on, the power
will automatically turn off.
Check that the power switch on the underside is turned on. (Page 14)
l o t u o i s n R ( e e f e r n e c p a g
1
) e