Importing/Exporting Flight Plans; Approaches (Without External Navigator Configured) - Garmin G3X Pilot's Manual

Flight Planning

IMPORTING/EXPORTING FLIGHT PLANS

Importing flight plans:
1) With a flight plan saved to the SD Card, press the FPL Key and turn the
FMS Joystick to display the Flight Plan List Page.
2) Press the IMPORT Softkey.
3) Using the FMS Joystick highlight the desired flight plan to import.
4) Press the IMPORT Softkey again and press the ENT Key.
Exporting flight plans:
1) Press the FPL Key and turn the FMS Joystick to display the Flight Plan List
Page.
2) Press the FMS Joystick to activate the cursor, and turn or move the FMS
Joystick to highlight the desired flight plan.
3) Press the EXPORT Softkey and press the ENT Key.
6.6 APPROACHES (WITHOUT EXTERNAL
NAVIGATOR CONFIGURED)
WARNING: Do not use the approach information provided by the VFR
navigation database residing within the G3X as a means of navigating any
instrument approach. The G3X VFR navigation database is limited to pres-
ent only the waypoints for the final approach leg of a published procedure.
These waypoints and associated course line are made available for monitoring
purposes only.
NOTE: This section is not applicable if an external GPS navigator is configured.
Approach configuration is handled via the external GPS navigator's controls
only. Refer to the external GPS navigator's Pilot's Guide for more information.
An approach can be loaded at any airport that has one available, and provides
situational awareness for non-precision and precision approaches to airports with
published instrument approach procedures. Only one approach can be loaded at a
time in a flight plan. If an approach is loaded when another approach is already in the
active flight plan, the new approach replaces the previous approach.
176
Garmin G3X Pilot's Guide 190-01115-00 Rev. J