Advertisement
The Serial Interface C82302* / C82304* is an interface
board that allows asynchronous serial data communica-
tion between a host computer and an Epson printer.
This board
a 32K byte buffer that frees up your computer for
other uses while your printer continues to print.
two self-test functions that can help solve interface
problems.
signal levels that can be set at either RS232C or 20
mA Current Loop.
handshaking protocol using X-on/X-off or DTR flag
control.
selectable data word structure. This
choose parity (Odd. Even, or None) and word bit
settings (either 7 or 8 bit).
selection of baud rate settings from 75 to 19,200 BPS.
(Data transmission speed is limited to 1,200 BPS
when the signal level is set to 20 mA Current Loop.)
This optional interface board is intended for use with the
following Epson printers:
FX, FX+, JX, LX, RX, RX+, HI-80 IX-800, EX-800/1000,
LQ-series (except for LQ-1500), SQ-series (except for SQ-
2000)
INTRODUCTION
features:
allows you to
Advertisement
