Advertisement
Data word structure
The data word structure is also operator selectable
through DIP switch settings (see Table 1). The word
structure for serial data is:
1 start bit + 7 or 8 data bits (selectable) + 1 Even or
Odd parity bit (optional) + 1 or more stop bits
The table below shows the possible word
Combinations.
Baud rate selection
In serial data communication, data is transmitted in the
form of bits. These data bits go out one at a time along a
single path, and in a specified order. The BPS
Second) rate, or speed at which these bits are transmit-
ted, can be selected using a combination of DIP switch
settings.
Note
In the current loop mode, normal data transfer operation
cannot be guaranteed at a baud rate setting exceeding
1,200 bps
7
structure
Per
(Bits
Advertisement
