Epson WorkForce AL-C500DN User Manual page 88

Item
*3
Power Off Timer
*1
Time to Off
*1
Not available in PS3.
*2
Not available when a USB cable is connected or an optional interface card is installed.
*3
If EU is not selected as the Region Setting for the initial settings, the default value is Off.
Preheat Mode
When this setting is set to On, the printer enters the preheat mode and reduces power consumption. In
this mode, the printer returns to the ready status faster than from sleep mode or deep sleep mode, but
uses more power.
Time to Preheat
Specifies the length of the time until the printer enters the preheat mode when the Preheat Mode is
set to On. The printer does not enter the preheat mode if the specified time in Time to Preheat is the
same as or longer than that of Time to Sleep.
Time to Sleep
Specifies the length of the time until the printer enters the sleep mode or deep sleep mode if there are
no button operations and no jobs to be printed.
Deep Sleep Mode
When this setting is set to On, the printer switches into the deep sleep mode at the time specified in the
Time to Sleep setting if the printer is not operated or receives no jobs. In the deep sleep mode, the
Wake Up/Sleep button lights and more power is saved than when in the sleep mode. The printer
switches to the deep sleep mode only when the AppleTalk, WSD, IPv6, and IPSec settings in
Network Menu and RAM Disk in Setup Menu are set to Off.
To recover from the deep sleep mode, press the Wake Up/Sleep button. The printer recovers
automatically when it receives a print job.
Power Off Timer (Power Off mode)
When this setting is set to On, the printer automatically turns off at the time specified in the Time to
Off setting. The printer does not enter the power off mode if it is receiving or sending data.
Settings (default in bold)
On, Off
30, 60, 120, 180, 240, 360, 480Min
AL-C500 Series User's Guide
Using the Control Panel 88