Epson WorkForce AL-C500DN User Manual page 100

AL-C500 Series User's Guide
Remove paper from Staple Stacker
Stapling failed. Make sure that only paper sizes compatible with stapling are selected for the printing
job.
To clear this error, remove the jammed paper in the paper ejection part of the stapler/stacker unit, and
then open and close cover M.
For details, see "Problems Using Stapler/Stacker Unit" on page 122.
Remove photocon protective tape uuuu
The protective tape is still on the photoconductor unit. Remove the photoconductor unit from the
printer, remove the protective tape, and then reinstall the photoconductor unit.
For details, see the instructions that come with the photoconductor unit.
Replace Feed Roller MP, Replace Feed Roller C1, Replace Feed Roller C2, Replace Feed Roller
C3, Replace Feed Roller C4, Replace Feed Roller C5
The feed roller has reached the end of its service life and needs to be replaced. If this error occurs,
consult your dealer.
Replace Fuser
The fuser has reached the end of its service life and needs to be replaced. For details about replacement,
see the instructions that come with the fuser unit.
Replace Photocon uuuu
The indicated photoconductor unit has reached the end of its service life and need to be replaced. See
"Replacing Consumable Products/Maintenance Parts" on page 146 for instructions.
Replace Staple Cartridge
Replace the staple cartridge. See the label on the 1000-Sheet Stapler/Stacker Unit for instructions.
Replace Toner uuuu
The indicated toner cartridge has reached the end of its service life and need to be replaced. See
"Replacing Consumable Products/Maintenance Parts" on page 146 for instructions.
Replace Toner uuuu Print in monochrome?
Using the Control Panel 100