Options - Epson WorkForce AL-C500DN User Manual

k.
Pause/Cancel button
l.
Data light (Green)

Options

You can add to your printer's capabilities by installing any of the following options.
❏ 550-Sheet Paper Cassette Unit (C12C802721)
This unit increases paper feeding capacity up to 550 sheets of paper. You can install up to two
units.
❏ 1100-Sheet Paper Cassette Unit (C12C802731)
This unit increases paper feeding capacity up to 1100 sheets of paper. You can install only one unit
on your printer.
❏ 1000-Sheet Stapler/Stacker Unit (C12C802741)
This unit increases paper output capacity to a maximum of 1000 sheets of paper. You can also
staple each set of copies using this unit.
❏ CompactFlash Memory
This option enables you to store overlay forms, use Reserve Job function, and improve the collate
printing environment. By using the Reserve Job function, you can store print jobs in the printer's
CompactFlash memory and print them later directly from the printer's control panel. By using the
collate printing function, you can print larger and more complex print jobs.
Note:
The CompactFlash memory must be at least 4 GB.
❏ Memory Module
This option expands the printer's memory by allowing you to print complex and
graphics-intensive documents. The printer's RAM can be increased up to 1024 MB by adding an
additional 512 MB RAM DIMM.
Press once to pause. Press again to recover from pause. While paused, the
following operations are available on the control panel.
- Canceling the current print job or stored print jobs.
- Interrupting print jobs to print a stored print job.
For instructions on these operations, see "Canceling Printing" on page 107 and
"Interrupting Printing" on page 108.
On when print data is stored in the print buffer (the section of printer memory
reserved for receiving data) but not yet printed.
Flashes when the printer is processing data.
Off when no data remains in the print buffer.
AL-C500 Series User's Guide
Getting to Know Your Printer 26