Epson WorkForce AL-C500DN User Manual page 70

Item
*2
Staple
*3
Skip Blank Page
*4
Auto Eject Page
Size Ignore
Auto Cont
*3
Page Protect
A4/LT Auto Switching
Convert to Monochrome
LCD Contrast
*2 *5
RAM Disk
Confirm Media Type
Job Info.
*1
Available only when you use A4, A5, B5, LT, HLT, LGL, GLG, EXE, GLT, or F4 size paper.
*2
Available only when the corresponding option is installed.
*3
Available only for ESC/Page, ESC/P2, FX, or I239X mode.
*4
Not available in PS3 and PCL.
*5
After this item is changed, the setting value takes effect after a warm boot or after the power is turned on again.
Language
Specifies the language displayed on the LCD panel and that printed on the status sheet.
Time Out
Specifies the length of the time, in seconds, before a time out when interfaces are being switched
automatically. The time before a time out occurs is the length of time from the point when no data is
being received from an interface until the point of switching the interface. If the printer has a print job
when switching the interface, the printer prints the print job.
MP Mode
Settings (default in bold)
Off, On
Off, On
Off, On
Off, On
Off, On
Auto, On
On, Off
On, Off
0 to 7 to 15
Off, Normal, Maximum
No, Yes
Display Pattern 1, Display Pattern 2, Off
AL-C500 Series User's Guide
Using the Control Panel 70