Set Event Notifications - Canon VK-16 v2.1 Administrator's Manual

Set Event Notifications

When an event occurs, it is indicated in the [Live Events Log] in the Viewer. In [Event Notification] Settings in
the [Viewer Settings] window, [Event Notification Settings] area, you can set up actions based on events
according to the priority of the event.
Set alert of event in each priority level
In the Priority area, you configure the following settings:
1. Tick the [Operator Notification] for box to enable a notification period when an event occurs.
Select a notification period in seconds from the [Seconds] drop-down menu or enter it from the keyboard
(0 - 99). When a event occurs, the event flashes in the [Live Event Log] window for the period of time
specified using this option, and a color bar indicating the event's priority light on the top of a live Video
Window for one minute.
If you specify 0 second, an event which has occurred will not flash and a color bar will light for one minute.
2. Tick the [Requires operator acknowledgement] box for the event.
When an event occurs it will flash in the [Live Events Log] and the audio alert will sound (if specified) until
the operator double-clicks on the event (that is, the notification time will not apply to the event in the event
log).
3. Tick the [Audio Alert] box to have an audio alert play during the event notification period.
The Windows system sound [Exclamation] is used for audio alerts (For a PC with no sound port installed, a
beep sound is used). This sound repeats for the duration of the [Operator Notification for __ seconds].
If [Operator Notification for __ seconds] is not set, the audio alert is played once.
4. Tick the [Don't show events] to have the event not displayed on the Timeline of the Viewing screen or on the
[Live Events Log] window even if the event occurs.
Tip
Even if [Don't show events] is ticked, events are shown in the [Search Results] in the [Event Search] dialog.
Viewer Setting
5-15