2. Backup Tool Operating Procedure
2.1. Backup Process Flow
● Following is the backup process flow.
Booting Backup
Tool
2.2. Boot-Up
● Double Click on exe file [VBC300BK.exe]
2.3. Selection of Camera to be Backed Up
● There are 2 ways of selecting cameras to be backed up.
① Enter necessary information for each camera one by one in [Camera Information Entry
Dialog]. (see page 6)
② Read Camera Information from Camera Specification File. (see page 9)
It is recommended to read multiple camera information from a camera specification file for backup of
multiple cameras at one time. (see page 9)
Selecting Camera
to be backed up
※ there are 2 ways of selecting cameras.
[Camera Information Entry Dialog]
5
Backup Tool Operating Procedure
Executing Backup
Process
to boot Backup Tool.
Log to be
created