Table of Contents
Advertisement
4.
Push the arm lock
release lever, which
can be found on the
main unit's left side
at the back.
• The camera arm will
now float freely.
6.
Swivel the camera head
horizontally until it clicks
into place.
Arm Lock Release Lever
5.
Grasp the camera
arm and lift it up
until it locks into
place with a click.
7.
Orient the camera head so
that the lens points directly
onto the object stage.
• Check to make sure that the
switch for the closeup lens on the
right of the camera head is set to
On (p. 97).
Assembly
2
27
Advertisement
Table of Contents
Troubleshooting
