Canon DZ-3600U User Manual page 8

19. Do not install the equipment in the following locations as this can cause fire or electric
shock.
- Hot locations.
- Locations close to open flame or fire.
- Very humid or dusty locations.
- Locations exposed to direct sunlight.
- Locations exposed to salt spray.
- Locations close to flammable solvents (alcohol, thinners, etc.).
20. When any of the following occurs, immediately switch off the equipment, unplug it from
the main power supply and contact your nearest Canon dealer. Do not continue to use
the equipment because this can lead to fire or electric shock.
- The equipment emits smoke, heat, abnormal noise or unusual odors.
- A metal object falls into the equipment.
- The equipment is damaged in some way.
21. Please observe the following when using the equipment. Failure to do so can result in
fire or electric shock.
- Do not use flammable sprays near the equipment.
- Do not subject the equipment to strong impacts.
22. Please observe the following when handling the batteries. Failure to do so may result in
the batteries bursting or emitting heat, sparks or corrosive fluid.
- Do not throw the batteries into a fire, and do not heat, short-circuit or attempt to
disassemble them.
- Do not attempt to recharge the batteries.
- Do not use batteries other than those specified for use with the equipment.
- Remove the batteries when they are used up or when the equipment will not be used
for an extended period.
- When replacing the batteries, always replace the entire set and do not use different
types of batteries together.
- Ensure that the positive (+) and negative (-) terminals are correctly positioned when
you load the batteries.
- If any soiling or leakage of the internal battery fluid occurs, thoroughly clean off the
soiling or leaked fluid with water.
Safe Use of the Equipment
9