Assembly; Front Light - Canon DZ-3600U User Manual

Assembly

This chapter explains the most fundamental and important operating proce-
dures step by step. We encourage you to try each step as you read about it.
26
!!! Important !!!
• This chapter assumes that you have correctly set up the DZ-3600U for
use with a computer and installed Presentation Software. If you have
not yet done this, follow the instructions in Chapter 1, Setup for Opera-
tion with a Computer, before resuming the steps below.
• Do not place the equipment on an unsteady table or object subject to
vibration. Movement of the camera head or filmed object and changes in
lighting may corrupt the image capture.
• Skip this and the following page if the three arms (two front lights and
one camera arm) have already been erected. Start from Turning On the
Power (P.28).
1.
Gently remove the cover
from the main unit if it
is on.
3.
Lift up the left front light.
2.
Facing the front of the
main unit, lift up the right

front light.