Installing The Software - Canon DZ-3600U User Manual

Installing the Software

The bundled software must be installed onto the hard drive of your computer
for it to work with the DZ-3600U.
The instructions below will show you how to install two programs: DZ-
3600U Presentation Software (hereafter referred to as Presentation
Software) and DZ-3600U TWAIN Driver (hereafter referred to as TWAIN
Driver). As its name suggests, Presentation Software works with your
computer to deliver presentations, serving as the key interface between
the two. TWAIN Driver is the software that enables the DZ-3600U to
capture and load images into TWAIN-compliant application programs,
such as the major graphics programs on the market.
!!! Important !!!
• These instructions cover the basic procedures for installing the software.
Persons new to PCs should follow these instructions to the letter.
••• Note •••
• Experienced computer users who wish to change the target directory or folder
for the installation, should comply with the on-screen instructions.
!!! Important !!!
• Make sure that the DZ-3600U's power is off before you install the
software. Attempting to install it with the power on will result in an
[Unknown device] error message after installation. If you have already
started to install the software with the power on, stop the installation,
shut down Windows and turn off your computer. Then reinstall with the
DZ-3600U's power off.
1.
Confirm that the main unit's
power is off.
2.
Turn on the computer's monitor (and any other
peripherals) and then the CPU.
• Windows will start.
1
19