Other Functions Of Wireless Lan - Canon SELPHY CP900 User Manual

Other Functions of Wireless LAN

Connecting to Other Access Points (Infrastructure Mode)
After connecting to an access point in infrastructure mode
as follows.
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
O
o button.
Press the ud buttons to select [Access Point Connect], and then press the o button.
O
Specify as described on
O
[Access Point Connect] is available only when the selected communication mode (below) is [Infrastructure].
O
Checking Setting Information
You can check connection settings such as the communication mode and channel, and printer information
such as the printer name and IP address.
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
O
o button.
Press the ud buttons to select [Confirm Settings], and then press the o button.
O
Press the ud buttons to check setting information.
O
Press the v to go back.
O
Changing Communication Mode
You can change the communication mode
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
O
o button.
Press the ud buttons to select [Comm. Mode], and then press the o button.
O
Press the ud buttons to select a communication mode, and then press the o button.
O
Press the ud buttons to select [Disable Wireless LAN], and then press the o button to stop using
O
wireless LAN.
Changing the Printer Name
You can change the printer name
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and press the
O
o button.
Press the ud buttons to select [Other Settings], and then press the o button.
O
Press the ud buttons to select [Set Printer Name], and then press the o button.
O
Press the EDIT button to display the screen to enter characters and enter the printer name
O
Setting the IP Address Manually
You can specify the printer's IP address and subnet mask manually.
Display the settings screen.
1
Press the k button, and then press the ud buttons to select [Wireless LAN Settings], and
O
press the o button.
Press the ud buttons to select [Other Settings], and then press the o button.
O
Press the ud buttons to select [IP Address Settings], and then press the o button.
O
Press the ud buttons to select [Manual], and then press the o button.
O
Set the IP address.
2
Press the lr buttons to select the position, press the ud buttons to set the value, and
O
then press the o button.
p. 31.
(p. 28) to connect to another device, or stop using wireless LAN.
(p. 29).
(p. 31), you can connect to another access point
(p. 42).
41