Download  Print this page

Specifying The Initial Settings; Choosing The Method To Connect The Machine; Choosing The Method To Connect: Via Wireless Lan Or Other Method; Connecting Via A Wired Lan - Canon MF244DW Getting Started

Hide thumbs

Advertisement

Specifying the Initial Settings

The fi rst time you turn on the power, follow the instructions
on the screen. For details on navigating the menu and how to
input the numbers, see "Navigating the Menu and Text Input
Method" (
P.10).
Complete settings starting with language
and through to date and time
Follow the instructions on the screen, set the language,
region, time zone*, and date and time*.
* MF244dw/MF232w Only
MF244dw/MF232w
Language
Czech
Danish
Dutch
English
MF231
Language
Czech
Danish
Dutch
English
Setting a Remote UI PIN (MF244dw/MF232w
Only)
You can set a PIN for access to the Remote UI. Protect the
machine from unauthorized access by only allowing users
with access privileges to use the machine.
To specify settings later, please refer to "Setting a Remote UI
PIN" in the User's Guide.
User's Guide "Setting a Remote UI PIN"
Set Remote UI Access
PIN? (Settings can
be configured later)
Yes
No
Choosing the Method to Connect the
Machine
Connecting via a Wired LAN (MF244dw/
MF232w Only)
You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access
point).
Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher ready.
Current Time Set.
08/08 2014 12:52
AM
(0:00-12:59)
Check that paper is
loaded in Drawer 1.
Previous
Next
Remote UI Access PIN
<Apply>
Connecting via a USB cable
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
Connecting via a Wireless LAN (MF244dw/
MF232w Only)
You can connect the machine to a wireless router*. Since it
is wirelessly connected, no LAN cables are needed.
* A wireless router (access point) that supports IEEE802.11b/g/n is
required.
Connect the computer to the router by cable or wirelessly.
If you do not sure whether your router is wireless or
wired:
See the instruction manual provided with your network
device, or contact the manufacturer.
Direct Connection (MF244dw/MF232w Only)
Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point).
User's Guide "Can Be Used Conveniently with a Mobile
Device" ▶ "Make Direct Connection (Access Point Mode)"
Choosing the Method to Connect:
Via Wireless LAN or Other Method
MF244dw/MF232w
Use wireless LAN to
connect to network?
(Can config. later.)
Yes
No
Connect to the computer via a wireless LAN
immediately
Yes
Start from step 4 of "Setting Wireless LAN" in the
Wireless LAN Setting Guide.
Connect to the computer via a wired LAN
Proceed to "Connecting via a Wired LAN (MF244dw/
MF232w Only)" (P.12).
No
Connect to the computer via a USB cable
Proceed to "Connecting via a USB Cable" (P.12).
MF231
Connect to the computer via a USB cable
Proceed to "Connecting via a USB Cable" (P.12).
En
Current Time Set.
Must rechg. battery
for 24 hours to save
time settings. After
turning main power
11

Advertisement

Table of Contents

   Also See for Canon MF244DW

This manual is also suitable for:

Mf232wMf231

Comments to this Manuals

Symbols: 0
Latest comments: