Setup Procedure Selection - Canon PIXMA MG4220 Series Setup Manual

2. Use the or
3. Press the left Function button (B).
The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled.
c Setup Procedure Selection
The printer will automatically search for access points supporting WPS (Wi-Fi Protected Setup).
* If the Push Button Method screen is displayed on the printer
When you are unsure if your access point or router supports this technology, press the Stop button.
Proceed to the screen for Standard setup.
Push Button Method →
button (A) to display the WLAN setup icon.
Select the most suitable connection method from the following.
d-A
• Standard setup →
Connect to Access Point by entering the Network Password
• WPS →
Connect to WPS-compatible Access Point
• Other setup (Advanced setup) →
Connecting to the Network by Entering the Access Point's Settings
Directly on the Printer
When using WEP key number 2, 3 or 4, select "Advanced setup".
d-B
d-C
d-D