Clean Lock
Cleaning the control panel while the cooktop is on may
change the settings.
In order to avoid this the cooktop has a Clean Lock
function. Touch Clean Lock/Child Lock. The
appears. The control panel is locked for approximately
Basic Settings
The appliance has various basic settings. You can adjust these settings to the way you usually cook.
Display
Function
Automatic child lock
™‚
Off*
‹
On
‚
Sound signals
™ƒ
Confirmation beep and error signal off
‹
Only error signal on
‚
All signals on*
ƒ
™†
Automatic timer
Off*
‹
-
Automatic shut-off time
‚
ŠŠ
Length of timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
Heating element activation
™ˆ
Off
‹
On*.
‚
Last setting before turning off the heating element
ƒ
Selection time for heating element
™Š
Unlimited*: You can adjust the settings of the last heating element used at any time without having to
‹
select it again.
Restricted: You can adjust the settings for the last heating element used within 10 seconds after
‚
selecting it. After that you will have to reselect the heating element before setting it.
Reset to basic settings
™‹
Off*
‹
Reset the appliance to basic settings
‚
*factory settings
16
35 seconds. You can now clean the surface of the
control panel without risk of changing the settings.
After the time has elapsed a beep will sound. The Clean
Lock is deactivated.
The Clean Lock function does not affect the main switch.
indicator
>
You can turn off the cooktop at any time.