Table of Contents
Advertisement
Troubleshooting
The machine will not start
Check
• that the door is properly closed.
• that the main power switch is on.
• that any plug is connected.
• that the fuses (circuit breakers) in your house
are intact. Flip the dryer breaker off and then
back on to make sure. You can not always tell
from the outside if the circuit breaker has
tripped.
• that the overheating cut-off has not been
triggered (see below).
• that the lint filter is in place and is clean.
Overheating cut-off
The overheating cut-off shuts off the tumble dryer
if the temperature is too high, caused by lint
clogging the lint filter, for instance.
• Clean the lint filter.
• The overheating cut-off will reset automatically
once the machine has cooled down.
Drying takes too long
• Check that the lint filter is not clogged (see the
"Care and maintenance" chapter).
The laundry does not dry, or is too
dry
• The door has been opened while the program
is running, which disrupts the moisture
monitoring function.
Error messages
• If "Max Program Time" appears on the display,
the maximum program time has been reached.
Read "Drying takes too long" in the
"Troubleshooting" chapter to find out what to
do.
• If "Clean lint filter" appears on the display,
clean the lint filter.
• Press the Stop button to close error messages.
Customer Care Center
1-800-898-1879
www.askousa.com
15
Advertisement
Table of Contents
