Press The Start Button; Drying Program Finished - Asko T712 Operating Instructions Manual

Operating instructions
6

Press the Start button

Remaining drying time
An estimate of the remaining drying time
will be shown on the display a few minutes after
the drying program starts. For example, 1:35
means it will take approximately 1 hour and 35
minutes for the load to dry. If the Anti Wrinkle op-
tion has been selected, the drum will rotate for 3
seconds every minute for 2 hours after the pro-
gram is finished.
Stopping or changing a program
Press and hold the Start/Stop button for three
seconds. The red field next to the button will go
out.
Note!
The program will not be affected if you change
the program selector after the program has start-
ed.
Loading or removing laundry
If you want to load or remove laundry once you
have started the machine, open the door and the
program will stop. Load more laundry or take out
the items you want, close the door, and press the
Start/Stop button.
7

Drying program finished

The text "END" appears on the display
when the program is finished. If the Anti
Wrinkle option has been selected, the drum will
rotate for 3 seconds every minute for 2 hours after
the program is finished.
Important!
• Clean the lint filter after each load.
Caution!
If the lint filter becomes clogged, the machine's
automatic overheating cut-off may be triggered.
In order to be able to restart the machine, you
must clean the filter and allow the machine to cool
down for around 30 minutes.
Cleaning the lint filter
1. Grasp the filter handle and pull it toward you.
2. Pull the filter out of its holder.
3. Open the filter and remove the lint by hand.
4. Fold the filter up and insert it into its holder. The
filter may need to be cleaned if it has limescale
deposits. See the "Care and cleaning" chapter.
Customer Care Center
1-800-898-1879
www.askousa.com
13