Removing The System Board - Dell Latitude D600 Service Manual

System Board: Dell Latitude D600 Service Manual
Back to Contents Page
System Board
Dell™ Latitude™ D600 Service Manual

Removing the System Board

CAUTION:
instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
The system board's BIOS chip contains the Service Tag sequence, which is also visible
on a barcode label on the bottom of the computer. The replacement kit for the system
board includes a CD that provides a utility for transferring the Service Tag sequence to
the replacement system board.
NOTICE: Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by touching an unpainted metal surface on the computer.
1. Follow the instructions in
2. Remove the keyboard.
3. Remove the
4. Remove the
5. Remove the
6. Remove the microprocessor.
7. Remove the
file:///F|/Service%20Manuals/Dell/Latitude/d600/sysboard.htm (1 of 4) [2/28/2004 8:15:54 AM]
Before performing the following procedures, read the safety
"Preparing to Work Inside the
display assembly.
palm rest.
microprocessor thermal-cooling
reserve battery
assembly.
cover.
Computer."