Installing The System Board - Dell Latitude D600 Service Manual

System Board: Dell Latitude D600 Service Manual
1 M2 x 3-mm screws (4)
9. Remove the four M2 x 3-mm screws labeled "circle B" that secure the system
board to the computer base.
10. Pull out the system board starting from the front of the palm rest.

Installing the System Board

1. Follow all of the steps in
NOTICE: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage
to the computer.
2. Turn on the computer.
file:///F|/Service%20Manuals/Dell/Latitude/d600/sysboard.htm (3 of 4) [2/28/2004 8:15:54 AM]
"Removing the System
4270E
Board" in reverse order.