Replacing the VGA/Power Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connectors on the VGA/Power board with the slots on the base
cover and place it on the base cover.
3 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55).
4 Follow the instructions from step 6 to step 17 in "Replacing the System
Board" on page 67.
5 Replace the display assembly (see "Replacing the Display Assembly" on
stray screws remain inside the computer. Failure to do so may result in damage to
Before turning on the computer, replace all screws and ensure that no