Table of Contents
Advertisement
1
2
3
1
display back cover
3
screws (8)
7 Make a note of the display cable and Mini-Card antenna cables routing
and remove them from the routing guides on the display back cover.
8 Turn the display panel over and place it on a clean surface.
9 Remove the display cable (see "Removing the Display Cable" on page 48).
10 Remove the display-panel brackets (see "Removing the Display-Panel
Brackets" on page 50).
Replacing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
2 Replace the display-panel brackets (see "Replacing the Display-Panel
Brackets" on page 50).
3 Replace the display cable (see "Replacing the Display Cable" on page 49).
4 Connect the camera cable to the connector on the camera module.
5 Route the display cable and Mini-Card antenna cables through the routing
guides on the display back cover.
2
display panel
47
Display
Advertisement
Table of Contents
