Table of Contents
Advertisement
10 Disconnect the speaker cable from the connector on the system board.
11 Remove the five screws that secure the system board to the computer base.
1
2
1
screws (5)
3
speakers cable connector
12 Lift the system board assembly to disconnect the connector on the system
board from the connector on the I/O board.
13 Turn the system board assembly over.
14 Follow the instructions from step 3 to step 5 in "Removing the Hard Drive"
on page 71.
15 Remove the thermal cooling assembly (see "Removing the
Thermal-Cooling Assembly" on page 75).
16 Remove the processor module (see "Removing the Processor Module" on
page 79).
66
System Board
2
system board
3
Advertisement
Table of Contents
