Table of Contents
Advertisement
1
2
1
display assembly
3
display-cable connector
Replacing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Place the display assembly in position and replace the four screws that
secure the display assembly to the computer base.
3 Route the Mini-Card antenna cables through the routing guides.
4 Connect the Mini-Card antenna cables to the Mini-Card(s) (see
"Replacing the Mini-Card(s)" on page 39).
3
2
4
screws (4)
Mini-Card antenna cables (2)
4
43
Display
Advertisement
Table of Contents
