6 Align the screw holes on the display panel with the screw holes on the
display back cover and replace the eight screws.
7 Replace the display bezel (see "Replacing the Display Bezel" on page 45).
8 Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Cable
Removing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 41).
3 Remove the display bezel (see "Removing the Display Bezel" on page 44).
4 Remove the display panel (see "Removing the Display Panel" on page 46).
5 Lift the tape that secures the display cable to the display-board connector
and disconnect the display cable.
48
Display
Before turning on the computer, replace all screws and ensure that no