Ieee 1394 Device - Sharp MV12W - Actius - PIII-M 1 GHz Operation Manual

IEEE 1394 Device

You can connect the IEEE 1394 devices to the IEEE 1394 port on the rear side of the
computer. The IEEE 1394 is digital interface for handling digital video, digital audio
and other data in two directions between devices, and for controlling other equipment.
4
IEEE 1394 Connector
When two or more IEEE 1394 compatible devices are connected to the computer in a
daisy chain, operations and data transactions are possible with not only the equipment
that is directly connected, but also with other devices via the directly connected
device.
• Confirm the IEEE 1394 device you will connect is Windows XP
• Some IEEE 1394 devices require that you install drivers before use.
• Use AC power for the computer especially when reading/writing the
Connecting an IEEE 1394 Device
• You need not turn off the computer before connecting the device.
• Be sure to read the manuals of the IEEE 1394 device before connecting
1. Connect one end of the DV cable with the IEEE 1394 connector of the computer.
4-16
compatible.
data.
it to the computer.