Writing Data To Cd-R/Rw Disks; Power Management - Sharp MV12W - Actius - PIII-M 1 GHz Operation Manual

Writing Data to CD-R/RW Disks

You can use a CD-R or a CD-RW disk to write data on. CD-RW is an erasable disk
onto which you can write data and from which you can erase data. CD-R is non-
erasable disk onto which you can write data only once. If free space remains, you can
add data until the disk is full.
To write data, run the application called Drag'n Drop CD installed with your
computer. See the online help of Drag'n Drop CD for the details. To run the
2
application, click start – All Programs - Drag'n Drop CD - Drag'n Drop CD.
Before writing to CD-R/RW, follow the instructions below:
2-10
• Connect the AC adapter. If the battery is discharged, writing to the
disk will be stopped and the write process will fail.
• Disable the power management. See Power Management of
chapter 3.
• Close any applications which are unnecessary for writing, or will
start automatically when the computer is turned on.
• Disable the screen saver.