Table of Contents
Advertisement
4.
Gently push the tray back into the computer.
• Do not leave the tray pulled out. Also, avoid touching the lens in the
tray. If the lens becomes dirty, the disk may malfunction.
• Do not wipe the lens with materials with rough surface (such as paper
towels). Instead, use a cotton swab to gently wipe the lens.
Removing a Disk
1.
Make sure the optical drive indicator is not lit and press the eject button. The
optical drive tray slightly opens.
2.
Gently pull out the tray.
3.
Remove the disk from the tray by holding its edge.
4.
Gently push the tray back into the computer.
Make sure the optical drive indicator is not lit or blinking before pressing
the eject button.
2
2-9
Advertisement
Table of Contents
