Boot Sequence; Bios Setup Utility - Fujitsu FPCM23451 User Manual

N
EVER TURN OFF YOUR NOTEBOOK DURING THE
ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR NOTEBOOK ON THE NEXT TIME
On Self Test Messages" on page 74.

Boot Sequence

The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook's
BIOS. When your notebook is first turned on, the main system memory is empty, and it needs to find
instructions to start up your notebook. This information is in the BIOS program. Each time you power up
or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your
operating system is found. During booting, your notebook is performing a standard boot sequence
including a Power On Self Test (POST). When the boot sequence is completed without a failure and
without a request for the BIOS Setup Utility, the system displays the operating system's opening screen.
The boot sequence is executed when:
• You turn on the power to your notebook.
• You restart your notebook from the Windows Shut Down dialog box.
• The software initiates a system restart. Example: When you install a new application.

BIOS Setup Utility

The BIOS Setup Utility is a program that sets up the notebook's operating environment. Your BIOS is set
at the factory for normal operating conditions, therefore there is no need to set or change the BIOS'
environment to operate your notebook.
The BIOS Setup Utility configures:
• Device control feature parameters, such as changing boot devices.
• System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
41 - Starting Your PH520 LifeBook
P O S T (POST)
OWER N ELF EST OR IT WILL CAUSE AN
. See "Power