Fujitsu FPCM23451 User Manual page 46

Your notebook can be put in Standby mode by:
• Pressing the Power/Suspend/Resume button when your system is turned on.
• Selecting Standby from the Turn off computer menu.
• Timing out from lack of activity.
• Allowing the battery to reach the Dead Battery Warning condition.
Your notebook's system memory typically stores the file on which you are working, open application
information, and any other data required to support operations in progress. When you resume operation
from Standby mode, your notebook will return to the point where it left off. You must use the
Power/Suspend/Resume button to resume operation, and there must be an adequate power source
available, or your notebook will not resume.
I
■
F RUNNING YOUR NOTEBOOK ON BATTERY POWER
WHILE YOUR NOTEBOOK IS IN
D
■ ISABLING THE
S
LEEP OR
T S
■
HE LEEP OR
PC C
YOUR
, H
USE IBERNATION
BECAUSE ALL OF THE PERIPHERAL DEVICES WILL BE RE
S
TANDBY MODE
P /S /R
OWER USPEND ESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO
H (S - -D
IBERNATION AVE TO ISK
H (S - -D
IBERNATION AVE TO
ARD DOCUMENTATION FOR MORE INFORMATION
(S - -D )
AVE TO ISK MODE CANNOT RETURN TO THE EXACT STATE PRIOR TO SUSPENSION
46 - Power Management
,
BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE
,
THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL
) . T
MODE HE BUTTON RESUME FUNCTION CAN
)
ISK MODE SHOULD NOT BE USED WITH CERTAIN
. W PC C
HEN
-
INITIALIZED WHEN THE SYSTEM RESTARTS
.
' .
T BE DISABLED
PC C . C
ARDS
ARDS OR EXTERNAL DEVICES ARE IN
.
HECK
,