HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Note page 16

About this document
Table 2: Zoning parameters supported limits
Number of zone members in a zone
Number of zones in a zone set
Number of unique zone members in a
zone set
Total number of zone members in a
zone set (where a zone member can be
in multiple zones)
Characters per zoning name
Number of unique zone members in
HAFM Zoning Library
Number of zones in HAFM Zoning
Library
Number of zone sets in HAFM Zoning
Library
Number of end ports
Number of devices supported (including
loop devices)
Using the same firmware
All directors and edge switches in the same fabric should have the same firmware
level installed—whether 1 Gbps or 2 Gbps capable, this firmware operates
correctly.
The recently released Edge Switch 2/12 had an interim firmware specific for the
Edge Switch 2/12, 05.05.00-12. This firmware cannot be used for any other edge
switch or director. This interim version is compatible with the M-Series firmware
05.01.00-24 and 05.02.00-13 used for the rest of the M-Series fabric products. The
firmware 06.02.00-22 is a common firmware for all the M-Series fabric products,
including the Edge Switch 2/12.
Firmware 06.02.00-22 includes minor bug fixes, and provides support for
second-generation Edge Switch 2/12 and Edge Switch 2/24 switches. This is the
minimum M-Series firmware supported on the second-generation Edge
Switch 2/12 and Edge Switch 2/24.
16
Zoning parameter Maximum value
2048
1024
2048
4096
32
2048
1024
64
1024
1024
HP StorageWorks Edge Switch release notes