Task 19: Configure The Element Manager Application; Configure Product Identification; Configure Identification Dialog Box - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 Installation And Service Manual

Task 19: Configure the Element Manager Application

Configure Product
Identification
Figure 2-28
To configure the Element Manager application, selectively perform
the following tasks according to customer requirements:
• Product - includes identification, product parameters, and fabric
parameters.
• Ports - includes basic information, buffer-to-buffer credits
(BB_Credits), and N_Port identifier virtualization (NPIV).
• Management - includes SNMP trap message recipients; threshold
alerts; EFCM Basic Edition interface access; Telnet access; and
e-mail, Ethernet event, and call-home event notification.
• Security - includes SANtegrity authentication, Enterprise Fabric
Mode, and SANtegrity binding.
• Interswitch links - includes OpenTrunking, preferred path, and
ISL port fencing.
Perform this procedure to configure the product identification. The
Name, Location, and Contact variables correspond respectively to the
SNMP variables sysName, sysLocation, and sysContact, and are used by
management workstations when obtaining product data.
1. Select Identification from the Configure menu at any view. The
Configure Identification dialog box displays

Configure Identification Dialog Box

a. Type a unique product name of 24 alphanumeric characters or
less in the Name field. If the product is installed on a public
LAN, the name should reflect the network DNS host name.
Installation Tasks
(Figure 2-28).
Installation Tasks
2
2-57