Brother ™ QL-1060N User Manual page 39

Users manual - english and spanish
Hide thumbs Also See for ™ QL-1060N:
Table of Contents

Advertisement

Available languages

Available languages

Problem
The Add-in feature icon is not
displayed on Microsoft
Cutter error
The printed bar code cannot be
read.
I want to reset the printer/delete
the data transferred from PC.
(QL-1060N only)
I want to cancel the current
printing job. (QL-1060N only)
• Is Microsoft
• Is Microsoft
®
Microsoft
®
Word.
Due to the limitation of the program, the Add-in feature of
®
Microsoft
Quit Microsoft
• If the cutter error occurs, keep the DK roll compartment cover
closed and press ON/OFF button. The cutter moves back to the
normal position and turns the machine OFF automatically. After
the machine is OFF, inspect the cutter unit and remove the
paper jam.
• Set the label vertical to the print head as shown below.
Label exit slot
Print head
• Some types of scanner are not able to read the bar code. Try
using another scanner.
• We recommend printing the Bar code with Print Quality options
set to "Give priority to print quality".
®
Windows
XP:
To change the Print Quality options, open the printer properties
from [Control Panel]-[Printer and other hardware]-[Printer and
Faxes], right-clicking the printer whose settings are to be
changed, then selecting [Properties]. Then, in the [General] tab,
click [Printing Preferences...].
Windows Vista
To change the Print Quality options, open the printer properties
by going to [Control Panel]-[Hardware and Sound]-[Printers],
right-clicking the printer whose settings are to be changed, then
selecting [Properties]. Then, in the [General] tab, click [Printing
Preferences...].
®
Windows
7:
To change the Print Quality options, open the printer properties
by going to
whose settings are to be changed, and selecting [Printer
properties]. Then, in the [General] tab, click [Preferences...].
• To reset the machine, press and hold the ON/OFF button to
switch the machine OFF. Then, hold down the ON/OFF button
for two seconds. Continue holding down the ON/OFF button,
and press the CUT button six times. The machine will then
reset. All the transferred data from the PC will be deleted and
the machine will be reset to factory setting.
• Make sure that the printer is ON, and press ON/OFF button.
Solution
®
Word started up from Microsoft
®
Word chosen for the editor usually used for
®
Outlook
?
Word is unable to be used with the above settings.
®
®
Outlook
, and restart Microsoft
®
:
-[Devices and Printers], right-clicking the printer
®
®
Outlook
?
®
Word.
Recommended
print direction
33

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Andtrade; ql-1050Andtrade; ql-1060nQl-1050nQl-1060n

Table of Contents