Brother ™ QL-1060N User Manual page 30

24 Installing the software
6
After restarting the computer,
connect the USB/LAN cable to the
machine.
As the caution label is put on the USB
port of the machine, remove it and
then connect the USB cable.
7
Connect the USB/LAN cable to the USB/LAN port of Macintosh
Press ON/OFF button ( ) of the machine to turn on the power.
When connecting the machine to Macintosh
connected correctly. At that time, connect the machine directly to the USB port
of Macintosh
8
(Mac OS
X is installed, and click in order of [Applications] - [Utilities] - [Printer
Setup Utility].
(Mac OS
Preferences], and click Print & Fax. Then click
For USB interface cable users
9
(Mac OS
USB at the top of the screen.
Choose QL-XXX from the list and click Add again
to add the printer to the Printer Setup Utility.
(Mac OS
Choose QL-XXX from the list and click Add to
add the printer to the [Printer Setup Utility/Print &
Fax].
For Mac OS
printer with the BRPTUSB connection. (If you do so, an error dialog appears
when an printing error occurs.) Set the appropriate printer name.
Now, go to step 10.
®
.
®
X 10.3.9 - 10.4.x) Double click the drive where Mac OS
®
X 10.5.x - 10.6) Click in order of [Apple menu] - [System
®
X 10.3.9) Click Add and choose
®
X 10.4.x - 10.6) Click Add/
®
X 10.4.x, click Add and add the
Serial port
USB port
LAN port
Power cord
®
via USB hub, it may not be
.
.
®
.
®