Brother ™ QL-1060N User Manual page 20

14 Installing the software
5
Put a check mark in the box next to the
Add-In programs you want to install, and
click [Next].
Follow the on-screen instructions.
Make sure that you closed all Microsoft
Office applications.
For details on the Add-in, see the "Software
User's Guide (PDF)".
6
Select the desired model, and then click [OK].
Follow the on-screen instructions of the Printer
Driver installation.
7
When instructed, connect the
printer to finish the printer driver
installation.
•
For USB installation, it is important
you do not connect the printer to the
computer until directed to do so.
•
Before connecting the USB interface
cable, remove the caution label
affixed to the USB port of the machine.
8
Select a registration method and click [Next].
•
If you choose "Yes, display the page", you will go to the online user registration
page before finishing the installation. (recommended)
•
If you choose "No, do not display the page", you will continue the installation.
9
Click [Finish].
The software installation is now complete.
When you are asked to restart the computer, choose "Restart" and click [Finish].
10
Start the software.
•
Click [Start] - [All Programs] - [Brother P-touch] - [P-touch Editor 5.0] to start P-touch Editor.
•
Click [Start] - [All Programs] - [Brother P-touch] - [P-touch Address Book 1.1] to
start P-touch Address Book.
For details on software, see
You can find the Software User's Guide by clicking [Start] - [ALL Programs] - [Brother
P-touch] - [Manuals] - [QL-Series] - [Software User's Guide].
®
USB port
"Software User's Guide".
Power cord
Serial port