System Requirements; Hardware Supported; Hardware Requirements - Cisco 3020 - Catalyst Blade Switch Release Note

Contents
Contents
This information is in the release notes:
•
•
•
•
•
•
•
•
•
•

System Requirements

The system requirements are described in these sections:
•
•

Hardware Supported

The hardware supported on this release is the Cisco Catalyst Blade Switch 3020.
Device Manager System Requirements
These sections describes the hardware and software requirements for using the device manager:
•
•

Hardware Requirements

Table 1
Table 1 Supported Hardware
Switch
Cisco Catalyst Blade Switch 3020
for HP
Small form factor pluggable (SFP)
modules
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(44)SE
2
"System Requirements" section on page 2
"Upgrading the Switch Software" section on page 3
"Installation Notes" section on page 6
"New Software Features" section on page 6
"Limitations and Restrictions" section on page 7
"Important Notes" section on page 12
"Open Caveats" section on page 14
"Resolved Caveats" section on page 15
"Documentation Updates" section on page 17
"Obtaining Documentation, Obtaining Support, and Security Guidelines" section on page 20
"Hardware Supported" section on page 2
"Device Manager System Requirements" section on page 2
"Hardware Requirements" section on page 2
"Software Requirements" section on page 3
lists the hardware supported on this release.
Description
24-Gigabit Ethernet ports and 4 SFP
module slots
1000BASE-LX, -SX, and -T
Supported by Minimum Cisco IOS Release
Cisco IOS Release 12.2(35)SE
Cisco IOS Release 12.2(35)SE
OL-14761-01