HP A3550A - High Availability Disk Arrays Model 20 Storage Enclosure User Manual page 298

Table 6-12 Extended Status Codes
Extended Extended status code
status code name
0x00 None
0x01 SCSI protocol error
0x02 Device detected parity error Drive returned sense data indicating data sourced at the SCSI
0x03 Device busy
0x04 Improper SCSI status byte
0x05 Media error
0x06 Time-out error
0x07 Selection time-out
0x08 Not ready
0x09 Hardware error
0x0A Bad format
0x0B Wrong device
0x0C User abort
0x0D Illegal request
0x0E Device saw bus reset
0x0F Mode select occurred
6-50 Unsolicited Event Log
Description
No error information available.
An error was detected and retried during activity on an internal
SCSI bus between the SP and the disk itself.
interface device on the SP encountered an internal parity
error.
Drive returned a "SCSI Busy" status indicating more than one
request was sent to the disk before the first one completed.
This can be seen most frequently in dual initiator (host)
configurations.
An unrecognized status byte was received during a SCSI
transfer, possibly due to a SCSI protocol violation.
A hard media error was detected at the disk level and the
sector remapped.
The SP microcode allocates 10 seconds for a disk to complete
a command. This error is a result of a disk not completing a
command within the allocated response time.
The targeted drive did not respond to SCSI selection. A status
of 0x47 indicates retries failed.
The drive returned a "Not Ready" SCSI Sense Key.
The drive returned "Hardware Error" Sense Key. Indicates an
internal electro-mechanical problem on the disk module.
Indicates the drive format has changed from the expected
sector standard for the array.
The drive is reporting a type not supported.
This error code should never be seen.
The drive returned an "Illegal Request" Sense Key. This
indicates an illegal command was sent to the disk.
The drive reported a Unit Attention resulting from the SP
microcode issuing a SCSI Bus Reset. The drive was idle at
time of reset or was just inserted.
This error code should never be seen.