A.5
Replacing a Power Supply
The xStack Storage Array contains three user replaceable power supply modules. They can
be replaced as follows.
1. Locate the failed power supply module. Unscrew the bolt holding the locking
mechanism in place as shown in Figure A-19.
2. Push the locking lever to the left and pull on the handle as shown in Figure A-20.
3. Remove the power supply module as shown in Figure A-21.
DSN-2100 Hardware Reference Guide
Figure A-19 Unscrew the Bolt Holding the Locking Mechanism
Figure A-20 Push the Locking Lever to the Left and Pull Handle
35