Table of Contents
Advertisement
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programs depending on the
broadcast signal.
1
Press M, then press I or i to display the
SOUND menu.
MTS
Dual
Bass
Treble
Balance
Stable sound
MENU
Back
2
Press u or U to select MTS, then press I or i
to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual program, set the MTS mode to
Mono.
Noise will be reduced and reception may
improve.
Note:
If you experience noise with a particular program
on whose channel reception is usually good, try
setting MTS mode to Auto, then switch s to
e Mono (monaural).
Selecting the dual 1 or dual 2 mode
You can hear only dual 1 or dual 2 sound
selected, whenever bilingual programs are
received.
1
Press M, then press I or i to display the
SOUND menu.
2
Press u or U to select Dual, then press I or i
to select Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the
Dual menu is not selectable.
• The Dual menu setting status remains even if
the TV is turned off.
20
Using the TV's features
SOUND
1/2
Auto
Dual 1
0
0
0
Off
EXIT
Watch TV
Selecting the stereo programs
1
When a stereo program is received,
d Stereo appears.
2
Press s to select the stereo/monaural
mode. d Stereo and e Mono appear
cyclically on the screen.
Stereo
Selecting the bilingual programs
1
When a bilingual program is received,
j Dual appears.
2
Press s to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast.
Dual 1
Display
NICAM
j Dual 1
Sub I sound
J Dual 2
Sub II sound
e Mono
Main sound
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
From the SOUND menu, press u or U to
select an item you want to adjust.
2
Press I or i to adjust the settings as required.
Bass
Sound to be heard
German stereo/
bilingual
broadcast
Main sound
Sub sound
—
0
Hide quick links:
Advertisement
Table of Contents
